![]() |
TrueCoat Reversible Tips
|
![]() |
|
|||||||
![]() |
ProSpray Technology
|
![]() |
Tip Guard
|
|||||||
![]() |
ProDurance Piston Pump
|
![]() |
Ergonomic Handle & Form-Fitted Trigger
|
|||||||
![]() |
Sprayer Hook
|
![]() |
Tilt-N-Spray Cup (32 oz)
|
|||||||
![]() |
Easy Start Up & Clean Up |
|||||||||
|
||||||||||

![]() |
Cups & LidsFor larger applications and less cup fills; includes a cover for storage or use to shake cup for fast cleanup without a cup liner. Quick and easy twist-on cup assembly.
|
![]() |
Shoulder StrapAttaches to the front and back of the TrueCoat Plus sprayer for hands-free movement on the job. |
|||
Material Cup Liners – 10 Pack
Fits either 32 or 48 ounce cups; plastic, disposable cup liners makes clean-up fast and easy.
|
Pump Armor – 32 oz [0.95 L]Protects airless pump during storage. Fill TrueCoat or TrueCoat Plus pump with Pump Armor and leave it in until you use it again. |
|||||
![]() |
TrueCoat Reversible TipsAvailable in narrow or wide fan sizes to spray thin to heavy, unthinned material. TrueCoat RAC (Reverse-A-Clean) is a uniquely designed tip and guard combination, optimized for use with ProSpray Technology.
|
![]() |
Tip Filter - 3 packThreads directly into the guard and filters paint for less tip plugs. |
|||
*Compatible with most material that can be cleaned with mineral spirits, paint thinner or water. Do not use materials which state "flammable" on the packaging. See product manual for details. |
||||||
| SPRAYER: | |||
| Maximum working pressure | 2000 psi (137.8 bar, 13.7 MPa) | ||
| Maximum amperage | 4 amps | ||
| Weight | 5.89 lb (2.67 kg) | ||
| Length | 13.25 in. (33.6 cm) | ||
| Width | 5.0 in. (12.7 cm) | ||
| Height | 10.75 in. (27.3 cm) | ||
| Storage temperature range◆❖ | 32° to 122°F (0° to 50°C) | ||
| Operating temperature range✔ | 40° to 90° F (4° to 32°C) | ||
| Storage Humidity Range | 0% to 95% relative humidity, non-condensing | ||
| Duty Cycle | 50% | ||
| Power Cord | 18 AWG, 3-wire, 18 in. (46 cm) | ||
| Electrical Power Requirement | 120 Vac, 60 Hz, 15A, 1 phase | ||
|
◆ Pump damage will occur if fluid freezes in pump. ❖ Damage to plastic parts may result if impact occurs in low temperature conditions. ✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance. |
|||